Specifications

Legal and Safety
xvi OPERATION GUIDE
Safety of Laser Beam (USA)
1. Safety of laser beam
This equipment has been certified by the manufacturer to Class 1 level under the
radiation performance standards established by the U.S.DHHS (Department of
Health and Human Services) in 1968. This indicates that the product is safe to use
during normal operation and maintenance. The laser optical system, enclosed in a
protective housing and sealed within the external covers, never permits the laser
beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the Center for
Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
(FDA). This act prohibits the sale of laser products in the U.S. without certification,
and applies to laser products manufactured after Aug. 1, 1976. The label shown
below indicates compliance with the CDRH regulations and must be attached to
laser products marketed in the United States. On this copier, the label is on the rear.
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is
invisible.
Shown at left is the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other
section of this manual.