Specifications

Legal and Safety
OPERATION GUIDE ix
Installation Precautions
Environment
CAUTION:
Avoid placing the machine on or in locations which are unstable or not
level. Such locations may cause the machine to fall down or fall over. This
type of situation presents a danger of personal injury or damage to the
machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become
attached to the power plug, clean the plug to avoid the danger of fire or
electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations
near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and
maintenance, allow access space as shown below. Leave adequate
space, especially around the vents, to allow air to be properly ventilated
out of the machine.
Other Precautions
Adverse environmental conditions may affect the safe operation and performance of
the machine. Install in an air-conditioned room (recommended room temperature:
around 71.6°F (22°C), humidity: around 60%RH), and avoid the following locations
when selecting a site for the machine.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
Left:
30cm
Front:
100cm
Right:
30cm
Rear:
25cm