User manual

Phone Calls 22
End Phone Calls
When you are finished with a call, make sure that you disconnect correctly.
Disconnect a Phone Call
► Press the END/POWER key .
After you have finished your call, the phone will display the caller’s name (if already in your
Contacts), phone number (if available), and the duration of the call.
Phone Call Options
Your phone application provides many useful features and options to help you make the most of
your calling experience.
In-call Options
Pressing the Right soft key [Options] during a call displays a list of available in-call
features. To select an option, highlight the option and press the Center soft key [Select].
● Add call to initiate a conference call.
● Go to Bluetooth settings to open the Bluetooth settings screen (if applicable).
● Use Bluetooth device to switch the call to a Bluetooth device (if applicable).
● Go to Idle screen to get to the Idle screen.
Further options may also be available.
● Press the Center soft key [Mute/Unmute] to mute/unmute the microphone.
● Press the Left soft key [Hold] to place the current call on hold.
● Press the Volume key up or down to adjust the receiver volume.
● Press the Camera/Speaker key to turn the speaker on. Press again to turn it off.
Warning:
Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Caller Name ID
Caller Name ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps: