User manual

Get Started 6
Charge the Battery
Fully charge the battery before powering on the phone.
Important: Unplug the charger from the electrical outlet when not in use to reduce the
environmental impact of charging.
Plug the smaller end of the USB cable into the USB/Charger port on the right side of the 1.
phone.
Plug the other end of the USB cable into the AC adapter, and then plug it into an 2.
electrical outlet. Be sure to use the AC adapter that came with your phone.
When charging is complete, remove the cable from the port. 3.
Warning:
Please use only an approved charger to charge your phone. Improper handling
of the charging port, as well as the use of an incompatible charger, may cause
damage to your device and void the warranty.
Battery Capacity
Your phone is equipped with a Lithium ion (Li-ion) battery. It allows you to recharge your battery
before it is fully drained.
For a quick check of your battery level, view the battery charge icon located on the right side of
the status bar. indicates that the phone is fully charged. The number of white bars
decreases as your battery discharges ( ). When your battery level reaches 15%, the battery
icon turns to and the phone sounds a warning tone, vibrates, and displays a low battery
message. When the battery level drops to 5%, the battery icon turns to and starts blinking.
The alert tone, vibration, and message will repeat when the battery level is at 10, 5 and 1%.
Note: Watch your phone’s battery level and charge the battery before it runs out of power.
Tip: The LED indicator blinks when your phone's battery level goes below 15%.