Specifications

9-6
Fax Settings > Default fax settings
Paper Output
FAX
Settings related to the fax function can be configured.
TX/RX Common
Transmission
Item Description
Paper Output Select output tray respectively for copy jobs, print jobs from Job Box, computers, and FAX RX
data.
Value: Inner Tray, Finisher Tray, Job Separator Tray
NOTE: If the optional document finisher has been installed, [Inner Tray] will change to
[Finisher Tray].
Item Description
Encryption Key Registration This is used to register an encryption key for encrypted communication.
Refer to Encryption on page 6-36.
FAX Remote Diagnosis If a problem arises with this machine and you contact our service representative, this feature
enables our Service Center computer to access the machine over the phone and check the
machine’s status or look for problems.
NOTE:To use Remote Diagnostics, you must first sign an agreement with our service
representative and register a Predetermined ID on the machine. For more information,
contact your Service Representative or Authorized Service Center.
Value: On, Off
Remote Diagnostics ID If you have turned on Remote Diagnostics, enter the predetermined ID.
Value: 0000 - 9999
Item Description
Local FAX Name Register the local FAX name printed in the transmit terminal identification (TTI) area.
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.
Local FAX ID Register the local FAX ID.
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.
NOTE:The Local FAX ID is used for transmission limit purposes. Refer to Transmission
Restriction on page 9-10.
Local FAX Number Register the local FAX number printed in the transmit terminal identification (TTI) area.
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.
TTI The transmit terminal identification (TTI) is the information about the sending machine (transmit
terminal) that is printed by the receiving machine on the received fax. The information includes
the date and time of transmission,number of pages sent, name and fax number. This machine
enables the user to select if the TTI is printed out on the fax on the receiving system. Regarding
the location of the information to be printed, you can select inside or outside of the page image
being sent.
Value: Off, Outside, Inside
NOTE:Normally, the Local FAX Name is printed in the transmit terminal identification (TTI).
However, when job accounting has been enabled, and you send originals after entering an
Account ID, the Account Name is printed.
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.