User's Manual

Basic Operation
3-37
3
Confirm Destination Screen
If the screen for confirming the destination before transmission (page 8-73) is set to [On], Check through the all
destination and press [Next]. appears when the Start key is pressed.
Part that is operated
Use the procedure below to operate the Confirm Destination screen.
1 Press the U or V key to check all destinations.
Press the OK key to edit or delete the selected
destination.
To add a destination, press [Cancel] (the Left
Select key) to return to the previous screen.
2 After the checking is finished, press [Next] (the
Right Select key). Set original and press Start key.
is displayed on the screen.
If there are destinations that are hidden and not yet
checked, the screen displays Check the
destination list through the end. and returns to the
Destination List screen. Check all destinations.
Destination List: a b
*********************
b 0667640000
b 0667741234
[ Cancel ] [ Next ]
p Morgan@kyoceramita N
p
Morgan@kyoceram Na b
1 Detail
2 Delete
Set original
and press Start key.
[ Cancel ]
Check the destination
list through the end.