User's Manual

Basic Operation

3-27

Press [Yes] (the Left Select key). This makes a

connection with the entered destination.

If the connection is successful, Connected. is

displayed on the screen. Press [OK] (the Right

Select key). Completed. is displayed and the

screen returns to the basic screen.

If the connection failed, Cannot connect. is

displayed. Press [OK] (the Right Select key). The

screen shown in step 3 reappears. Check and re-

enter the destination.

If there are additional destinations, press the Add

Destination key. Repeat steps 2 to 12 to enter

additional destinations. Up to 100 destinations can

be specified.

Press the Confirm Destination key to confirm the

registered destinations.

Press the U or V key to select a destination and

press the OK key. Then, you can edit or delete the

destination.

Press [Exit] (the Right Select key) to return to the

basic screen.

Press the Start key. Transmission starts.

NOTE: If the screen for confirming the destination

before transmission (page 8-73) is set to [On], the

Confirm Destination screen appears when the Start

key is pressed. For more information, refer to Confirm

Destination Screen on page 3-37.

Dest. Confirm.:

Morgan@kyoceramita

*********************

0667741234

[ Exit ]

0667640000

Dest. Confirm.:

*********************

[ Exit ]

OSAKA SD