User's Manual

Management
11-4
5 Press the OK key. User Login appears.
6 Press the U or V key to select [Local Authentic.]
or [Netwk Authentic.], and then press the OK key.
Select [Off] to disable user login administration.
When "Network Authentication" is selected, select
[NTLM], [Kerberos], or [Account Agency] for the
server type and press the OK key.
If [NTLM] or [Kerberos] is selected for the server
type, enter the host name (up to 64 characters)
and domain name (up to 256 characters) of the
authentication server, and press the OK key.
If [Account Agency] is selected for the server type,
enter the host name (up to 64 characters) and port
number of the authentication server, and press the
OK key.
NOTE: If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator registered in the local
user list and correct the settings. If the server type is [Kerberos], only domain names entered in uppercase will
be recognized.
Completed. is displayed and the screen returns to
the User Login Set. menu.
User Login: a b
1 *Off
*********************
3 Netwk Authentic.
2 Local Authentic.
Server type:
a b
*********************
2 Kerberos
3 Account Agency
1 NTLM
Host Name:
A b
GUI
*
ABC
[ Text ]