User's Manual

Default Setting (System Menu)
8-123
8
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Sleep Level].
6 Press the OK key. Sleep Level appears.
7 Press the U or V key to select [Quick Recovery]
or [Energy Saver].
8 Select [Quick Recovery] and press the OK key.
Completed appears and you return to the timer
settings menu.
Select [Energy Saver] and press the OK key. The
detailed settings screen of Energy Saver mode
appears.
9 Press the U or V key to select the desired item.
Items that can be set are as follows:
•Network
• USB Cable
• Card Reader
• RAM Disk
•NIC
10 Press the OK key. The setting screen of each item
appears.
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
1 Err. Clear Timer
Sleep Action:
a b
*********************
2 Energy Saver
1 Quick Recovery
Status:
a b
*********************
2 USB Cable
3 Card Reader
1 Network
Network:
a b
*********************
2 On
1 *Off