User's Manual

Default Setting (System Menu)
8-104
IMPORTANT: Before performing color registration, be sure to perform color calibration (see page 103). If color
drift remains, perform color registration.By performing color registration without performing color calibration, the
color drift will be resolved once, however, it may cause the serious color drift later.
Normal Registration
Follow the steps below to correct normal color drift.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the U or V key to select [Color Regist.].
4 Press the OK key. Color Regist. appears.
5 Press the U or V key to select [Normal].
6 Press the OK key. The normal registration
appears. Press the U or V key to select [Print
Chart].
7 Press the OK key. The chart print confirmation
menu appears.
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[ Exit ]
= Adjust/Maint.
Adjust/Maint.:
a b
*********************
2 Send/Box Density
3 AutoColorCorrect
[ Exit ]
1 Copy Denst. Adj.
Color Regist.:
a b
*********************
2 Detail
[ Exit ]
1 Normal
Normal:
a b
*********************
2 Adjust Magenta
2 Adjust Cyan
1 Print Chart
Print.
Are you sure?
w Registration chart.
[ Yes ] [ No ]