Datasheet

General Note This datasheet does not give any information on product availability. The information given is just meant to describe the product
and is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the interest of further
technical development. Copyright: KYOCERA AVX Components (Werne) GmbH (GER)
www.kyocera-avx.com
10/2021
Page 1 / 2
Technical data
Switch resistance initial
value
≤ 25 mΩ
Switching mode
Non shorting (white bottom
plate), shorting (black bottom
plate)
Switch resistance after 15
000 cycles
≤ 50 mΩ
Number of wafers
1 / single wafer
Insulation resistance
1 x 10
9
Ω
Indexing angle
30°
Test voltage
1 kV- / 1 kV DC
Stops
Fixed or without stop
Switching voltage
Max. 150 V DC / AC
Operating torque
2 - 4.5 Ncm
Switching current
Max. 130 mA, Ag plated
Solder terminals
For printed circuit
Switching power
Max. 5 VA, Ag plated
Contact material
Silver plated copper alloy
Steady current at 20 °C
ambient temperature
3 A
Insulation material
Plastic
Operating life at maximum
power
≥ 15 000 cycles
Spindle
Plastic, L = 6 or 20 mm
(Standard)
Operating life no load
≥ 20 000 cycles
Switching combinations
(see page 2)
1 x 2 to 1 x 12; 2 x 2 to 2 x 6;
3 x 2 to 3 x 4; 4 x 2 to 4 x 3;
6 x 2
Capacity between two
contacts
≤ 3 p F
Rotary knob switches
Serie 419
Type 419
Basic design: width 19.4 mm, plastic moduled
spindle diameter 6 mm