Operation Manual

47
In just a few steps you can
dismantle the scooter down t
o
the following components to
make it ready for transport:
1. Chassis
2. Batteries
3. Drive unit
4. Rear panelling
5. Seat unit
13.3.1
W
orking step summar
y
1. Remove the seat unit.
2. Remove the rear panelling.
3. Remove the batteries.
4. Fold the tiller down.
4. Disengage the drive unit from the chassis.
13.3.2
Removing the seat and rear panelling
Tilt the seat backrest forwards.
Lift the seat while pulling the seat lock
(a) out of the seat support (1).
Pull the rear panelling(b) off the scooter
upwards.
13.3.3
Removing the batte
r
ies
Press the locking device on the plug and
disconnect connecting plugs on the cable.
Remove the battery belts.
Remove the batteries.
T
ransport ing the scooter
{
|
}}
~

(a)(1)
(b)