Operation Manual

41
Thi ngs t o know
12
. 0 Things to know
12.1
The battery charger - functioning principle
The battery charger regulates the voltage (Volt)
and the current (Ampere) from your mains
connection down to the voltage required for
charging your batteries (24 Volt). The amount of
charging current required is dependent on the
charging state of the discharged batteries.
Batteries mostly discharged = more charging current
Batteries half discharged = decreased charging current
Batteries completely charged = no charging current
Since no charging current is flowing when the batteries are full,
the batteries cannot be overloaded.
12.2
The Batteries
The entire power supply is taken over by
two 12 V batteries.
These are located below the motor
cover under the seat.
The batteries used in the scooter are
known as batteries for cyclic use.
Only enclosed maintenance-free
batteries are used.