Operation Manual

Pushing
37
Disengaging the dri
v
e
9.0
Pushing
In order to be able to push the scooter you
must disengage the drive motor.
The disengaging lever (1) is located on the
right-hand side of the scooter
No one is permitted to sit on the scooter
when it is being pushed.
= Pushing (a):
Switch off.
Push the disengaging lever (1) forwards
as far as the stop (limit position).
=Dri
v
ing (b):
Pull the disengaging lever (1) to the rear
as far as the stop (limit position).
NOTES
• Always switch off to push it.
• If a pre-set speed is exceeded while you are pushing ,
the drive motor will switch on automatically and brake the scooter.
Risk of accidents!
• Do not pull the disengaging lever while driving.
•
Never switch to push mode when somebody is sitting on
the scooter.
• The
engaging lever always needs to engage securely at the
limit position.
•
Do not disengage the motor when on an incline.
10 . 0 Attaching the shopping basket
Push the shopping basket (1) from
above into the basket holder receptacles
(2) on the tiller.
NOTE
Use the shopping basket only for
small loading.

