Operation Manual

Driving
33
8.2
T
urning the seat
The seat can be turned to both sides of the
angle, and firmly engaged in 8 positions
(each position turns 45°).
T
urning the seat:
Pull the turning lock (1), turn the seat
in the required direction or position (2)
and engage.
Accident hazard due to
incorrect seat position!
• Always turn the seat to face
forwards
and engage it before
driving.
If the seat has been turned, the
possibility of tipping is increased.
• Before turning the seat,
always
ensure
that the scooter is on an
even and solid surface.
8.3
Switching on
The switch is located on the dashboard.
Insert the key into the switch and turn it to
the right to switch on.
Switching on
8.3.1
Ope
r
ation indicato
r
and fault displa
y
This light shows that the scooter is switched
on and ready for driving.
It also displays any errors in the scooter
electronics and electrical system. Fault
display takes place using different blinking
speeds or blink sequences. You can find more
information in the chapter entitled
“Troubleshooting”.
Operation indicato
r
ON


180°
135°
90°
45°
0°
45°
90° 135°