Operation Manual

31
Driving
8.0
8.1
Driving
Getting on and off
Please observe the following before
getting on or off:
•
The
scoote
r
must be standing on firm, level
and non-slippery ground.
The engaging lever for push mode must be
in the drive position (see chapt. 9.0)
Turn off and remove the key.
Tilt the steering column forwards
(see chapt. 6.3)
When getting in and out, ensure that your
clothing does not get caught on the drive
lever.
T
urning the seat
•
•
•
•
getting on
After you have got onto the scoote
r
, pul
l
the seat lock (1) forwards again, turn the
seat to face the direction of travel (4)
and engage.
Accident hazard due to
non-engaged seat!
• Ensure that the seat is
properly
engaged after getting
on by turning the seat slightly
left
and right.
