Operation Manual

A
djusting the seat
22
6.2 Adjusting the seat position
Adjusting the distance between seat and
tiller
Pull the locking lever (1) upwards and move
the seat forwards or backwards to the
required distance.
Let go of locking lever and engage the
locking mechanism by pushing the seat
slightly forwards and backwards.
Mo
v
ing the seat
Accident hazard due to
non-engaged seat!
• Ensure that the seat is properly
engaged
after adjustment by
pushing the seat slightly forwards
and then backwards.
A
djusting the armrest
width
6.2.2
Adjusting the armrest width
Loosen both clamping screws (2).
Pull both armrests (3) simultaneously
to the required width.
Secure the armrests by tightening
the clamping screws.
CAUTION!
• Do not pull the ar mrests further
out than the
marking (a) for
maximum armrest width.
6.2.1
(1)
(2)
(3)
(a)