Operation Manual

17




(10) HORN/LIGHTS INSPECTION
X Turn the ignition switch " " and press the horn button
to check if it sounds.
X Headlight/Taillight Inspection:
X Turn on the headlight switch to check if the headlight and
taillight are good and check the light shells for dirt and
damage.
X Stoplight Inspection:
X Apply the front and rear brake levers respectively to check
if the stoplight is good. And also check the stoplight shell
for dirt and damage.
X Turn Signal Light Inspection:
X Operate the turn signal switch to make sure whether the
right/left front and rear turn signal lights can wink and
buzz. Also check the light shells for dirt and damage.
 Headlight  Turn signal light Taillight/ Stoplight
Horn button
※ CAUTION:
X Replace any dirty or damaged lights with new ones to
avoid danger during riding.