Operation Manual

OPERATING THE SCOOTER

8.4 OVERLOAD PROTECTION

The overload protection switches the power off when the

motor becomes overloaded while trying to climb over

too high an obstacle, such as a curb or trying to climb

too steep of an incline.

If the motor is overloaded, the following happens:

• The scooter becomes noticeably slower and then stops

• The scooter system shuts down the scooter

To rectify this:

Switch the scooter off and allow it to cool down for a

few minutes.

Push to reset the overload switch located on the

battery box (see diagram).

Switch the scooter on and reverse away from the

obstacle (such as a curb) and then avoid the obstacle.

8.5 SWITCHING ON THE HORN

Press the horn button.

It will sound for as long as you hold the

button down.