Operation Manual

16
(10)HORN/LIGHTS INSPECTION
·
Turn the ignition switch to the “ON” position
and push the horn button to check if it sounds.
·Headlight/Tailight Inspection:
Start the engine and turn on the headlight switch
to check if the headlight and taillight are good
and check the light shells for dirt and damage.
·Stoplight Inspection:
Apply the front and rear brake levers
respectively to check if the stoplight is
good.And also check the stoplight shell for dirt
and damage.
·Turn Signal Light Inspection:
Operate the turn signal switch to make sure
whether the right/left front and rear turn signal
lights can wink and buzz.Also check the light
shells for dirt and damage.
① Headlight ②Taillight/Stoplight
③ Turn signal light ④ Horn button
CAUTION:
·Replace any dirty or damaged lights with new ones
to avoid danger during riding.
④