Operation Manual

8
(6)SEAT LOCK
·Unlock the seat and put the helmet in the MET-IN box.
《Unlocking Method》
Stop the engin and turn the ignition switch to the “OFF”
position.Insert the ignition switch key into the seat lock
and turn it right.
·To lock the seat,push on it until it lock automatically.
Make sure the seat is secure before riding.
CAUTION:
Never put the key inside the seat cushion to lock the seat.
(7)HELMET BUCKLE
1.Open the seat with the ignition switch key and lift up the
seat.
2.Put the helmet retaining ring into the helmet buckle.
3.Put down the seat and it will lock automatically.
·Take out the helmet in the reserve order of the above steps.
CAUTION:
· When riding,wear the helmet and do not retain it on the
motorcycle to avoid damage of coated parts.