User's Manual

ManualsBrandsKYE Systems ManualsComputers & AccessoriesWireless Laser Mouse

MLC-610B User’s Manual

1. Contents

- 2.4GHz Laser Mouse

- Nano Dongle

- Two AAA Battery

- Mouse Driver CD

- User’s Manual

2. Hardware Installation

- Open the battery cover from the bottom case

- Take off the Nano Dongle from battery compartment

- Close the battery door

- Plug Nano dongle into PC USB port

- Turn on the power switch

- Keep Mouse close to dongle waiting 5~8 seconds for connecting action. (When device

connecting blue led will blinking, when device finished connecting blue led will turn off.)

- When PC screen show find new input device information then user can start use mouse

3. Driver Installation

Notice: The driver supports Windows 2000 XP and Vista

- Installation driver CD could be automatically

Recognized once plugged in. In case it doesn’t work, please try below.

- Insert the driver CD → Double click “Setup.exe” and follow set-up instructions.

- A Mouse Setting icon will appear on the task bar.

- Setup step:

Driver Installation - MLC 610B

1. Double click “Setup.exe”

Follow set-up instructions

2. The InstallShield Wizard will install MLC 610B on your computer, click Next.

Summary of content (4 pages)

PAGE 1
MLC-610B User’s Manual 1. Contents - 2.4GHz Laser Mouse Nano Dongle Two AAA Battery Mouse Driver CD User’s Manual 2. Hardware Installation - Open the battery cover from the bottom case Take off the Nano Dongle from battery compartment Close the battery door Plug Nano dongle into PC USB port Turn on the power switch Keep Mouse close to dongle waiting 5~8 seconds for connecting action. (When device connecting blue led will blinking, when device finished connecting blue led will turn off.
PAGE 2
3. Select folder where setup will install files. Click Next. 4. Setup Status 5. Click Finish to complete setup.
PAGE 3
6. A mouse icon will appear on the task bar. 4. Battery Notice - When LED indicator appeared red color it means the battery is low Please change the battery immediately. Press any button to wake up the mouse while it is in the standby mode. 5. DPI Change Notice - - Press (Right key and Wheel key) for 2 seconds DPI will be change When user changing dpi, blue Led will blink for 3 times, then current DPI value will show on monitor let user know dpi change action finish.
PAGE 4
8. Certification FCC/CE/MIC(KCC)/BSMI Certification PLEOMAX Website- http://www.pleomax.com Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.