Quick Star Guide 2.
Important Safety Instructions To protect against risk of fire, bodily injury, electric shock or damage to the equipment: ■ Do not immerse any part of this product in water or other liquid. ■ Do not spray liquid on this product or allow excess liquid to drip ■ Do not use this product if it has sustained any type of damage. ■ Disconnect this product before cleaning. inside. This guide is copyrighted by Toshiba Corporation with all rights reserved.
Toshiba Wireless Optical Mouse W30 Quick Tour The following figures show the components of the top and underside of the mouse. DO NOT direct the optical sensor light at anyone's eyes. System Requirements ® ® ■ Microsoft Windows XP, ■ Mac OS 10.x or above ■ USB port ® ® Setting up the Mouse Installing the Batteries 1. 2. 3. 4. ® Windows Vista , Windows 7 , Windows 8 Open the battery cover. Remove the Nano receiver from the mouse. Insert the batteries into the battery compartment as shown.
Toshiba Wireless Optical Mouse W30 Establishing a Connection between the Mouse and the Computer 1 2 3 Plug the Nano receiver into an available USB port on your computer. Slide the Power switch upward to the ON position. The battery indicator light on the top of the mouse will glow red for approximately three seconds. When the light turns off, the mouse is ready for use. NOTE The mouse will enter sleep mode after a period of time to conserve power. Move the mouse or click the button to wake it up.
Toshiba Wireless Optical Mouse W30 Specification* Item Model number Buttons Interface Power requirements Description W30 Left, Right, Scroll wheel USB Operating: 1.5V/35 mA Stand-by: 1.5V/1.29 mA Sleeping: 1.5V/0.45 mA Dimensions (D x W x H) 98.10 x 58.06 x 28.00 mm Weight g Wave length 465~470 nm Velocity 30 inches/sec Acceleration 10 g Optical sensor 3200 times/sec Resolution 1600 DPI Frequency band 2.4 GHz (2.402~2.