User's Manual

ENGLISH
8
3.3 Monitor mapping area:
If you are using two monitors, there are four modes to define the mapping area.
1. AlI (Full Area): Select the largest possible mapping area depends on the monitor size.
2. Part (Programmable Area): Allows you to define the dimensions for top, bottom, left and right.
Define the size in each section.
3. Particular Monitor: Select monitor 1 or 2 for mapping.
Click “Apply” to activate these mode changes.
This mapping function will sync with your monitor(s) when connected. It also can work with
more than two monitors.
Product Name
Product Name