User's Manual

ENGLISH
15
6. The Mapping Section:
6.1: Monitor mapping area:
If you are using two monitors, there are four modes to define the mapping area.
6.1.1. AlI (Full Area): Select the largest possible mapping area depends on the monitor size.
6.1.2. Part (Programmable Area): Allows you to define the dimensions for top, bottom, left and right.
Define the size in each section.
6.1.3. Particular Monitor: Select monitor 1 or 2 for mapping.
Click “Apply” to activate these mode changes.
This mapping function will sync with your monitor(s) when connected. It also can work with
more than two monitors.
Product Name