ENGLISH Hardware Installation 1. Push the button to open the upper cover and insert two AA batteries in the mouse. Pairing Process in Windows XP SP2 1. Press and hold the “CONNECT” button under the mouse until the LED turns green. 2. Open the Windows control panel, then select “Bluetooth devices”. 3. Click “Add…..
ENGLISH 4. Select “My device is setup and ready to be found”, then click “Next”. 5. In “Peripherals (Keyboards, mice, joysticks)”, select Genius Bluetooth Mouse and click “Next”. 6. Select “Don’t use a passkey” and click “Next”.
ENGLISH 7. Windows will start to connect the Genius Bluetooth Mouse automatically. Press the finish button after the connection process is completed. Once the connection between the Genius Bluetooth Mouse and your computer is established, the connection will be kept permanently. That means the connection will re-establish automatically each time you run Windows. Pairing Process in Mac OS X 10.2.6 or later 1. Press and hold the “CONNECT” button under the mouse until the LED turns green.
ENGLISH 2. Click the Bluetooth icon on the task bar and select “Setup Bluetooth device”. 3. Click “Continue” when the “Bluetooth Setup Assistant” appears.
ENGLISH 4. Choose “Mouse” and press “Continue” to the next step. 5. When Bluetooth finds the “Genius Bluetooth Mouse”, please press “Continue” to the next step. 6. Click “Continue” when the “Passkey exchange with your mouse” appears.
ENGLISH 7. The connection is now successful and you can use your Genius Bluetooth Mouse. Now you can use the Genius Bluetooth Mouse wirelessly with a Bluetooth enabled Apple computer. Afterwards, the connection of the Genius Bluetooth mouse will re-establish automatically each time Mac OS X runs. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
ENGLISH [R1] This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
