Users Manual

English
Status
Function
Button Operation
Description
alternately, enters the pairing
status.
Bluetooth Reset
Long press and hold
the and
keys for 3 seconds
(If the TWS has been paired,
please release the TWS
funcon rst, the reset
funcon can work normally.)
In the Bluetooth status, press
and hold the and
keys for 3 seconds, there will
make a nocaon sound,
which means that all
memories have been cleared
and the Bluetooth state is
entered. The red LED ashes
and you can pair the
Bluetooth device.
8 Bluetooth TWS
Long press key
for 3 seconds
Long press key for 3
seconds. A er a nocaon
sound from the speaker, the
LED ash alternately, enters
TWS pairing status.
Long press key on the
main speaker for more than 3
seconds. Aer a nocaon
sound from the speaker, the
blue and red LEDs on the
secondary speaker ash
alternately, indicang that
the TWS funcon is disabled.