Users Manual

English
Turn o TWS Funcon:
Long press key on the main speaker for more than 3 seconds. Aer a
nocaon sound from the speaker, the blue and red LEDs on the secondary
speaker ash alternately, indicang that the TWS funcon is disabled.
7. Pairing, TWS, previous song, next song these funcons only work under Bluetooth
status.
8. Aer power on, short press buon on the remote control to enter the
Bluetooth mode, short press the buon on the remote control to enter the
LINE mode.
9. Reset :
(If the TWS has been paired, please release the TWS funcon rst, the reset funcon
can work normally.) In the Bluetooth status, press and hold the and
keys
for 3 seconds, there will make a nocaon sound, which means that all memories
have been cleared and the Bluetooth state is entered. The red LED ashes and you
can pair the Bluetooth device.
10. Turn o: Unplug the power supply and the LED is o.
二、Button Function