English 4. A�er press bu�on on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode. 5. Pairing: In the Bluetooth status, long press bu�on on the remote control for 3 seconds. When the speaker will make a no�fica�on sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue and red LEDs flash alternately.
English Turn off TWS Func�on: Long press key on the main speaker for more than 3 seconds. A�er a no�fica�on sound from the speaker, the blue and red LEDs on the secondary speaker flash alternately, indica�ng that the TWS func�on is disabled. 7. Pairing, TWS, previous song, next song these func�ons only work under Bluetooth status. 8. A�er power on, short press Bluetooth mode, short press the bu�on on the remote control to enter the bu�on on the remote control to enter the LINE mode. 9.
English Status Function Turn off Turn on Power on Bluetooth Short press bu�on Power on Line Power on Turn off Short press bu�on Unplug power Bluetooth 2 / Line Increase Volume 1 Bluetooth / Line Decrease Volume 4 Bluetooth Previous Track 5 Bluetooth Next Track 3 Play music Pause Line Mute 6 7 Bluetooth PAIR Button Operation The red LED is on when the USB power code of speaker is plugged in, and enters LINE mode by default.
English Status Function Button Operation Description alternately, enters the pairing status. (If the TWS has been paired, please release the TWS func�on first, the reset func�on can work normally.) In the Bluetooth status, press Long press and hold Bluetooth Reset the and keys for 3 seconds and hold the and keys for 3 seconds, there will make a no�fica�on sound, which means that all memories have been cleared and the Bluetooth state is entered. The red LED flashes and you can pair the Bluetooth device.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
