Tus neeg siv phau ntawv

14 | kvm-tec kvm-tec | 15
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. EXTENDER INSTALLATION 2. EXTENDER INSTALLATION
kvm-tec | 14
2. EXTENDER INSTALLATION
2.1 UNPACKING AND CHECKING THE CONTENT
Before using the product for the rst time it should be checked for damage. In case of damage
due to transport inform the carrier immediately. Before delivery the product is checked for its
function and its operating safety.
Make sure that the packaging contains the following content:
1x media4Kconnect Special redundant/uncompressed /local Extender CPU
1x media4Kconnect Special redundant/uncompressed /remote Extender CON
2 x 12 VDC 2 A power supply
1 x DP - DP cable 1.8 m/5,9ft
1x USB A-B cable 1.8m/5,9ft
8 x mounting feets
kvm-link 2 x 10GSFP+ installed
The monitor or television in use has only one HDMI input, no DP.
With HDMI it is important to know that we need HDMI 2.0 for UHD @ 60Hz.
2.2 MOUNTING KIT
2.2.1 MOUNTING (OPTIONAL)
Rack Mounting Kit RMK-F
The rack mounting kit RMK-F is for assembling kvm-tec media4Kconnect extenders. It consists
of 19“ rack tray and an alu-faceplate.
2.3 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
The units can be set up to access point to point or over a Switching System with a host
computer.
In the case of the latter, an additional 10 G Network Switch and a Windows PC or tablet with the
Switching Manager must be installed with a Network Switch, each user can gain quick access to
any of the required computers.