Tus neeg siv phau ntawv
Table Of Contents
- 1.1 Intended Use
- 2.1 Unpacking and checking the contents
- 1. Introduction
- 2.1 Unpacking and checking the content
- 1.5 About the status LED
- 1.4 Product elements
- 1.3 Technical specifications
- 1.2 Safety intructions
- 3. Using on screen menu
- 2.8 Best practice for Windows 10
- 2.7 Removing a fiber cable
- 2.6 Replacing the SFP module
- 2.5 Start up
- 2.4 media4Kconnect in the Matrix Vario System
- 2.3 Installing the extender
- 2.2 Mounting kit
- 4.1 Menu Features
- 3.4 Settings
- 3.3 Update menu
- 3.2. Features menu
- 3.1. System status
- 5.2. Disposal
- 5.1 Extender Care
- 4.1.2 Matrix Switching System
- 6. Support & First Aid
- 8.1 Switches
- 9.1 extended warranty
- 10. Address & phone / emails
- 11. Notes
38 | kvm-tec kvm-tec | 39
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
4. EXTENDER FEATURES
4.1.2 MATRIX SWITCHING SYSTEM
Pressing „S“ takes you to the Matrix Switching System conguration.
If this function is active, the Multiview Commander and Mouse Glide functions are controlled
via the Switching Manager software (see Switching Manager manual).
All functions of the switching system can be controlled via the Switching Manager
software can be operated.
With this link you can download the Switching Manager Software Manual
downloaden: www.kvm-tec.com/en/support/manuals r
4.1.3 USB EMULATION MODE
When this mode is set, the local extender emulates a keyboard and mouse always connected
to the PC. The result is switching from one PC to another PC without any switching delay.
Emulation Mode is restricted to mouse and keyboard only.
4.1.4 USB SAVE FEATURE
Press „U“ to go to the USB SAVE FEATURE conguration.
With the activation, the intrusion of computer viruses can be prevented via USB-
mass storage can be prevented. Data from a connected USB mass storage device cannot
then be accessed.
4.1.5 MOUSE GLIDE & SWITCH
Multiple media4Kconnect extenders can be congured to automatically switch the USB
operation of each computer and follow the mouse movement.
Up to 8 monitors can be congured both vertically and horizontally.
You can change the existing layout by pressing the T key and the F key can be used to search
for extenders that are not displayed.
Press the C key to reset all settings.
Press the A key to apply all settings made.
4.1.6 UNCOMPRESSED MODE
By pressing „V“ you can activate and deactivate the Uncompressed Mode. Once enabled, the
KVM Extender transmits up to 4K resolution uncompressed and in 10bit color depth.
Please note that for this mode you need two 10G ber optic lines between the Remote and
the Local Unit!
4.1.7 UNLOCK FEATURES REDUNDANT OR
UNCOMPRESSED FOR SWITCHING SYSTEMS
In this menu you can also enable the „Uncompressed“ and „Redundancy“ feature after
purchasing your 4k KVM Extender.
Order the unlock code for the desired feature from your supplier by providing the device ID
and serial number of the 4k KVM Extender.
By entering the unlock code you unlock the desired feature. Activate the desired feature after
unlocking in the Features menu.
4. EXTENDER FEATURES