Tus neeg siv phau ntawv
Table Of Contents
- 1.1 Intended Use
- 2.1 Unpacking and checking the contents
- 1. Introduction
- 2.1 Unpacking and checking the content
- 1.5 About the status LED
- 1.4 Product elements
- 1.3 Technical specifications
- 1.2 Safety intructions
- 3. Using on screen menu
- 2.8 Best practice for Windows 10
- 2.7 Removing a fiber cable
- 2.6 Replacing the SFP module
- 2.5 Start up
- 2.4 media4Kconnect in the Matrix Vario System
- 2.3 Installing the extender
- 2.2 Mounting kit
- 4.1 Menu Features
- 3.4 Settings
- 3.3 Update menu
- 3.2. Features menu
- 3.1. System status
- 5.2. Disposal
- 5.1 Extender Care
- 4.1.2 Matrix Switching System
- 6. Support & First Aid
- 8.1 Switches
- 9.1 extended warranty
- 10. Address & phone / emails
- 11. Notes
26 | kvm-tec kvm-tec | 27
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
3.3 UPDATE MENU
Display of rmware version
By pressing the „U“ key or by selecting the arrow keys, you reach the update menu, in which the
rmware of the Extender will be displayed and can be updated.
SCREEN „Update“
3. MAIN MENU & SETTINGS
1. The current version of the rmware can be downloaded at http://www.kvm-tec.com/
support . Each update le contains a detailed description of the update process. For
further information please refer to the update chapter
2. Connect the USB stick to the CON (REMOTE) unit (wait a few seconds until the USB stick
is connected to the CON unit).
3. Open the update menu with the „U“ key.
4. Press „S“ to display this le
5. The rmware is displayed with „Conguration found“
6. Press „ U“ to start the update on the Remote (CON) Unit
SCREEN „Update“
3. MAIN MENU & SETTINGS