SmartKey Instructions

Kwikset
1-800-327-5625
www.kwikset.com
a b c e
© 2019 Spectrum Brands, Inc.
a b c
d
Remove the key.
Required tools
SmartKey™
Tool
Allen
Wrench
How to Re-key the Lock (if needed)
IMPORTANT: Remove lever before re-keying.
1
a b c d
Re-install the lever.
3
Re-key the lock.
2
Insert the key and
turn it 90° clockwise.
Loosen the pre-
installed set screw.
Turn the key 90°
counterclockwise.
Remove the lever.
Insert the key that currently operates
your lock, and turn it 90° clockwise.
Insert the SmartKey tool fully and
irmly into the SmartKey hole, then
remove the SmartKey tool and
current key.
Fully insert your new key
into the lock and turn it 180°
counterclockwise. Next, turn the key
90° back to the starting position,
then remove it.
Install the lever. Insert the key and turn it
90° clockwise.
Secure the lever by
tightening the pre-
installed set screw.
Turn the key 90°
counterclockwise
to remove it.
Insert the
tool to this
depth.
SmartKey
Tool hole