Specification Sheet

SPECIFICATIONS KPO5-43
COOLING CAPACITY BTU/hr @ 95F at 60% RH 60,000 (5-Ton)
Operating Temperatures 30-110 F 50%RH
HEATING - OPTIONAL
Heat Strips/BTU 12kW/41,600
COMPRESSOR DATA
Compressor Type Hermetic Recip.
Refrigerant 407C
FAN DATA
Evaporator
Fan Type (Centrifugal) Direct Drive
Air Flow (CFM) 2,400
Supply and Return Air Device
1-12" flanges for supply duct and 1-12" flange for return
duct
Maximum Duct length 50' each for supply and return
Condenser
Fan Type (Centrifugal) Direct Drive
Air Flow (CFM) 3500
Condenser Exhaust flange 12"
Condenser Duct Max. Length 65'
Condenser fan speed control Variable Frequency Drive
ELECTRICAL DATA
Power Supply (Volts) 460 Three Phase
Current Consumption (Amps) 14
Power Consumption (kW) 9
Maximum Circuit Breaker (Amps) 30
Recommended Breaker Size 30
Minimum Circuit Ampacity (Amps) 17.4
Min./Max. Voltage 420-500
Power Cord Gauge/Length 10 AWG/10'
Plug Configuration Hard Wired
Power Quality Control Internal Phase and Power Monitor
CONSTRUCTION
Skid 12 Gauge G90 Galvanized Steel with Epoxy Powdercoat
Cabinet 16 Gauge G90 Galvanized Steel with Epoxy Powdercoat
Casters 6" Heavy Duty Swivel and Locking
DIMENSIONAL DATA
Width x Depth x Height (Inches) 32" x 48" x 49" with 6" casters
Weight (Lbs.) 700
Shipping Weight (Lbs.) 757
SAFETY DEVICE DATA
Compressor Overload Internal
Fan Motor Overload Automatic Internal
Evaporator Freeze Protection Hot Gas Bypass with variable fan speed control
High Pressure Switch Manual
Low Pressure Switch Automatic
Compressor Short Cycle Yes
Automatic Restart Yes
Thermostat Type Digital
Condensate Pump Overflow Yes
Internal Condensate Pump (high lift) Yes
1-800-KWIKOOL
www.kwikool.com