Specification Sheet

SPECIFICATIONS KPHP2211
COOLING AND HEATING CAPACITY
HEATING
BTU/hr @ 55F at 60% RH 21,240 (Nominal 1.8-Ton)
COOLING
BTU/hr @ 95F at 60% RH 17,700 (Nominal 1.5-Ton)
COMPRESSOR DATA
Compressor Type Hermetic Rotary
Operating Cooling Temperatures 60-110 F 50%RH
Operating Heating Temperatures 40-80 F 50% RH
Refrigerant 410A
FAN DATA - Evaporator
Fan Type (Centrifugal) Direct Drive
Air Flow (CFM) 600
Supply Air Device Adjustable Vent
Supply Air Chute Kit (optional) 2 - 6" Dia. x 16" Length
FAN DATA - Condenser
I/O Integral Condenser Balanced Air Flow
Fan Type (Centrifugal) Direct Drive
Air Flow (CFM) 950
Condenser Duct Specs (optional) 2 - 12" Dia. x 8' Length
Condenser Duct Max. Length 25'
ELECTRICAL DATA
Power Supply (Volts) 115/Single Phase
Current Consumption (Amps) 13.7 Cooling / 16.2 Heating
Power Consumption (kW) 1.65
Maximum Circuit Breaker (Amps) 30
Recommended Breaker Size 20
Minimum Circuit Ampacity (Amps) 21.875
Min./Max. Voltage 105-125
Power Cord Gauge/Length 12/6'
Plug Configuration NEMA 5-20
DIMENSIONAL DATA
Width x Depth x Height (Inches) 20.25" x 41" x 43.25"
Weight (Lbs.) 278
Shipping Weight (Lbs.) 328
Ceiling Kit Weight (Lbs.) 38
Shipping Weight w/ Ceiling Kit 366
SAFETY DEVICE DATA
Compressor Overload Internal
Fan Motor Overload Automatic Internal
Evaporator Freeze Protection Hot Gas Bypass
High Pressure Switch Manual
Low Pressure Switch Automatic
Compressor Short Cycle Yes
Automatic Restart Yes
Thermostat Type Microprocessor/Digital
Condensate Pump Overflow Yes
Condensate Tank Overflow Yes
1-800-KWIKOOL
www.kwikool.com