KAM Operation Manual
KwiKool AtticMaster Series KAM Operation Manual Table of Contents Section I / Unit Components - Page: 3 Section II / Introduction - Page: 3 Section III /Quick Start Procedure - Page: 4 Section IV / Operating Procedure- Page: 4 Section V / Important Notes - Page: 4 Before installing and using your KwiKool Portable Cooling System, read this manual carefully for instructions and proper usage and all safeguards. This manual should be retained for future reference.
I / Unit Components 7 1 4 3 5 6 2 8 9 Legend 1. Duct Clamp 6. Fan/Cool Switch 2. 30’ Duct 7. Handle 3. Condensate Tank 8. Hot Air Exhaust 4. On/Off Switch 9. 8” Wheel 5. High Low Switch II / Introduction The KwiKool AtticMaster is designed to move conditioned air up to 90’ into a hot ambient environment in order to provide spot cooling. The duct opening must be placed within 5’ of the person being cooled for effective use.
III / Quick Start Procedure A. Select Location of System - Make sure all sides of unit are not blocked to avoid restricted air flow. B. Remove duct from bag - Attach duct clamp to the ring on top of the unit, making sure the clamp is tight and run eyelets into the ring. C. Attaching extra 30’ length of duct - Squeeze duct end loop and insert into first duct end loop. A maximum of three 30’ lengths of duct can be used for a total maximum length of 90’.
Revision 071916
