User's Guide
K60x User Guide
non-technical staff as precise mechanical alignment, as required by previous generation 60
GHz systems, is not required.
The K60x system is designed for use in multiple applications including gigabit access, IoT
backhaul (sensors, security cameras, etc.), optical fiber extension, and corporate and
enterprise data backhaul services by providing 1 Gbps of symmetric throughput.
The K60x system operates in unlicensed Time Division Multiplexing (TDD) band 57.05 –
64.00 GHz in both Point-to-Point (PtP) and Point-to-Multipoint (PtMP) configurations. Some
of the main product characteristics are shown in Table 1.
Table 1: Main K60x Characteristics
Duplex Mode
Time Division Multiplexing (TDD)
Physical Layer / Antenna
System
128 patch beamforming antenna
Operation Configuration
PtP and PtMP
Capacity
1.86 Gbps goodput aggregate
Symmetry
Dynamic downlink (DL) and uplink
(UP) based on offered load
Frequency of Operation
57.05 – 64.00 GHz
Channel Bandwidth
2.16 GHz
Network Interface
2 x 2.5 gigabit Ethernet
1x 1 gigabit Ethernet
Form Factor
7.75 x 4 x 2.5” with integrated
antenna
The K60x system consists of the following components:
● Hub Unit: control communication to one or more Remote Units
● Remote Unit: scan for available Hub Units and connect to the Hub configured or
assigned via the Edge Controller
Kwikbit K60x User Guide - 8 -