User's Guide


K60x User Guide
9 LED Indicator Codes
K60x is equipped with a single double color (red and green) LED indicator. The following are
the LED indication modes. The sequences indicate the LED state during each 150ms time
slot
● during boot up: solid red
● normal operation:
o no wireless link: repeat the sequence: green, off, off, green, off, off ...
o established wireless link:
▪ Hub: solid green
▪ Remote: signal quality from 1 blink for weakest to 5 blinks for the
strongest between pauses. Example: for link quality of 3 the repeat
sequence is: pause green green green
● error condition:
o repeat the sequence: red, off, red, off, red, off, off, off
● identify the unit
o repeat the sequence: red, green
● signal for reset to factory defaults:
o repeat the sequence: green, red, green, red, green, red, off, off
● restore factory defaults is in progress:
o repeat the sequence: red, off, red, off, off, off, green, off, green, off, off, off

10 Using the K60x Web User Interface (UI)

10.1 Requirements
The K60x embedded WebUI allows for direct configuration of both Hub and Remote units.
It is a standard web application that runs directly on the K60x unit and is accessible
through the default port for HTTPS (443) at URL https://<Host name of the unit>. Your
browser will display a warning stating that the connection is not secure. You may ignore the
warning and proceed connecting to the unit. To avoid the warning, go to the Kwikbit
support website, download the Kwikbit security certificate, and install it on your browser.
The recommended browsers for the K60x WebUI are:
● Google Chrome
● Safari

Operating System (OS) support for K60x WebUI:
● Windows
Kwikbit K60x User Guide - 19 -