User's Guide
K60i User Guide
example, if the unit Host name is KB-C5-6B-78, then the URL address of the unit is
https://KB-C5-6B-78.local. Your browser will display a warning stating that the
connection is not secure. You may ignore the warning and proceed connecting to
the unit. To avoid the warning, please go to the Kwikbit support website, download
the Kwikbit security certificate, and install it on your browser.
● Management IP Address: An operator assigned, static, Automatic Private IP
Addressing (APIPA) or Dynamic Host Configuration Protocol (DHCP) IP address can
be used for remote management of the units. Both Hubs and Remotes need a
management IP address. For the Hub, the management IP Address is accessible
from the Ethernet side of the network, while for the Remote the management IP
Address is accessible from the wireless side (i.e., from behind the Hub). All traffic to
and from the management IP address can be encapsulated in an
operator-configurable VLAN.
The optional Kwikbit Edge Controller’s management application automatically discovers all
connected K60i devices on the network and establishes a secure connection to each one
utilizing a security certificate provided by Kwikbit and customized by the customer. For
more information on the Kwikbit Edge Controller device and associated applications, please
refer to the Kwikbit Edge Controller User Manual.
The K60i system provides the following network management functions:
1. Device configuration information and status is displayed on the WebUI page
interface as shown above in Figure 2. When the mouse cursor is hovered over an
Ethernet Port or wireless connections icon, detailed information is displayed. In the
Wireless section, the list of wirelessly connected devices is displayed. The list of LAN
connected devices is displayed in the LAN Peers section. The WebUI of a connected
device is established by clicking on the device’s name.
2. Configuration Management. The system configuration section covers several
functional areas:
● Device
o Device location
o Device description
● Wired Network
o Device IP address assignment
▪ Static address
▪ DHCP – requires DHCP server
▪ Automatic Zero Configuration address assignment
o Management VLAN
o Ethernet ports
▪ Enable / Disable
▪ PoE Enable / Disable (port 2 and 3)
● Wireless Network
Kwikbit K60i User Guide
Confidential & Proprietary - 16 -