User's Guide
The K60c system consists of the following components:
● Hub Unit: control communication to one or more Remote Units
● Remote Unit: scan for available Hub Units and connect to the Hub configured or
assigned via the Edge Controller
● Edge Controller: Optional appliance computer that provides WebUI tools for
deployment planning, commissioning, network configuration, management,
monitoring and fault isolation. Edge controller is highly recommended for networks
of medium and large scale.
The K60c Hub and Remote Units are identical from a hardware perspective, only differing
in software configuration. The K60c has a small form factor that can be easily and
unobtrusively deployed in many different outdoor environments.
K60c units will interoperate with other products in the Kwikbit K60 product line.
4 K60c System Description
Kwikbit’s K60c wireless outdoor networking solution is designed to meet the requirements
of network planners where rapid and flexible deployment, high reliability, multi-gigabit
capacity and excellent latency performance are needed. Applications for the system include
IoT gateway aggregation, Wi-Fi access point backhaul, video camera connectivity and other
gigabit IP based applications. The system can function either as a Point-to-Point (PtP) or
Point-to-Multipoint (PtMP) wireless Ethernet bridge.
Some of the main characteristics of the system include:
● Time Division Duplex (TDD): The K60c solution features TDD access mode with
variable frame length.
● Adaptive Modulation with Link Adaptation: The K60c system supports BPSK,
QPSK on both the downlink and uplink path to achieve high capacity in the channel
bandwidth (1.86 Gbps Ethernet layer throughput for combined downlink and uplink
traffic).
● Beamforming: Use of the 60 GHz band allows extremely fast communication, but
also presents the challenge of limited propagation. Signals in the 60 GHz band are
also more susceptible to disruption from physical barriers than at lower
frequencies. The K60c system includes adaptive beamforming, a technique that
enables robust multi-gigabit communications at greater distances. Kwikbit’s
beamforming feature uses directional antennas to reduce interference and
automatically focus a signal between two devices into a concentrated beam. During
the beamforming process, devices establish communication and then fine-tune
Kwikbit K60c User Guide - 8 -
K60c User Guide