User's Guide
within short range and in the presence of reflective surfaces. By utilizing advanced
beamforming techniques, the K60c system automatically adapts in Point-to-Multipoint
(PtMP) communication configuration and is adaptable to changes in the operating
environment. The beam forming capability also makes system installation simple for
non-technical staff as precise mechanical alignment, as required by previous generation 60
GHz systems, is not required.
The K60c system is designed for use in multiple applications including gigabit access, IoT
backhaul (sensors, security cameras, etc.), optical fiber extension, and corporate and
enterprise data services by providing 1 Gbps of symmetric throughput.
The K60c system operates in unlicensed Time Division Multiplexing (TDD) band 57.05 –
64.00 GHz in both Point-to-Point (PtP) and Point-to-Multipoint (PtMP) configurations. Some
of the main product characteristics are shown in Table 1.
Table 1: Main K60c Characteristics
Kwikbit K60c User Guide - 7 -
K60c User Guide
Duplex Mode
Time Division Multiplexing (TDD)
Physical Layer / Antenna
System
K60c: 64 patch beamforming
antenna
K60c+: 128 patch beamforming
antenna
Operation Configuration
PtP and PtMP
Capacity
1.86 Gbps goodput aggregate
Symmetry
Dynamic downlink (DL) and uplink
(UP) based on offered load
Frequency of Operation
57.05 – 64.00 GHz
Channel Bandwidth
2.16 GHz
Network Interface
1x 1 gigabit Ethernet
Form Factor
7.3 x 3.15 x 1.2” with integrated
antenna