User's Guide


K60 User Guide

At the top of the WebUI screen, general node information including unit name, description,
and location is displayed. There are two network sections on the page, Wireless and LAN.
The Wireless section displays the connection SSID, the unit role (Hub or Remote) and all
current wireless connections. If the unit is a Hub, all currently linked Remotes will be
displayed under connections. If the unit is a Remote, only one connection to a Hub can be
listed. Each connection displays the connected unit name as well as graphical
representation of the signal quality of the connection. By clicking on the connected device’s
name, a browser page of that device is opened. By hovering over the signal quality graphic,
detailed signal level information is displayed. You can change SSID and unit Role
Kwikbit K60 User Guide - 20 -