Instructions / Assembly

Proper ination is the key to safety and performance of your Airhead inatable.

Want your inatable to last for several seasons? Then make sure it's full of air!

INFLATION GUIDE

TOWABLE INFLATION GUIDE

UNDER INFLATED

Photo A- shows a severely underinated tube. Note how the adult sinks in

when standing on the tube. Under-ination causes the towable to sit low in the

water. Additional stress is applied to the tube, cover, rope and boat/watercraft,

by being dragged through the water instead of pulled across it. This stress

Orders Are Shipping Out Within 1-3 Business Days / Free Shipping On All Domestic Orders Over $50

Back to the top

PAGE 1
Orders Are Shipping Out Within 1-3 Business Days / Free Shipping On All Domestic Orders Over $50 INFLATION GUIDE Proper inflation is the key to safety and performance of your Airhead inflatable. Want your inflatable to last for several seasons? Then make sure it's full of air! TOWABLE INFLATION GUIDE UNDER INFLATED Photo A- shows a severely underinflated tube. Note how the adult sinks in when standing on the tube. Under-inflation causes the towable to sit low in the Back to the top water.
PAGE 2
Orders Are Shipping Out Within 1-3 Business Days / Free Shipping On All Domestic Orders Over $50 causes the air in tubes to be displaced and the tube may rupture. The same stress causes nylon covers to tear and ropes to stretch. The boat/watercraft cannot plane off and extra gas is consumed. PROPERLY INFLATED Photo B- shows a properly inflated tube. Note how the cover is taut with few wrinkles, and how the adult barely sinks in when standing on the tube.
PAGE 3
Orders Are Shipping Out Within 1-3 Business Days / Free Shipping On All Domestic Orders Over $50 PUMPS First, it is important to know that tubes do not require high pressure; they are low pressure / high volume products. Most towable tubes can be inflated using one good electric pump or a combination of 12 volt and hand pumps. Some of the newer 12-volt inflators have been designed specifically to inflate beds or tubes, but will still not fully inflate some of the bigger tubes now on the market.