Operator's Manual

LOADING BBs
1. Pull the magazine follower down until it locks.
2. Insert BBs into the magazine lip.
3. BBs should stack staggered for maximum round capacity: 48 rounds.
4. Make sure to have a 3mm clearance between BBs and the top lip of the
magazine.
5. Push the magazine follower lock to release.
Note: Always use KWA Perfect BBs, size 0.2 or 0.25g. Using only KWA Perfect BBs can
give your Airsoft gun its best performance. Using recycled and low grade BBs may damage
the gun.
WARNING: Do not release the magazine follower when the
magazine is empty. Doing so will damage the magazine and
magazine follower.
!
2
4
3
1
5
Check for 3mm
clearance after
loading BBs.
3mm
Push
down
to lock
Push
to
release
Magazine Lip
9
M93R II NS2