Operator's Manual

HOP-UP ADJUSTMENT

To adjust the Hop-Up, make sure the magazine is loaded and that you have at least 65 feet

of clearance for a test re before making any adjustments.

1. Test re the gun for 10 to 20 rounds and observe the BB’s traveling pattern.

2. Remove the magazine.

3. Open the slide and place adjusting tool into the slotted chamber ring. Turn the

adjusting ring a 1/4-inch at a time.

4. If the BBs are dropping too quickly, move the adjusting ring to the left or

counter-clockwise to give the BB more hop. If the BBs are dropping too slowly,

move the adjusting ring to the right or clock-wise.

5. Test re and adjust as needed.

HOP–UP SYSTEM

The Hop-Up device is one of KWA’s standard features, giving Airsoft BBs greater stability,

further travel and consistency. Airsoft BBs are light-weight and can be affected by

wind when red. With the Hop-Up system, the trajectory of the Airsoft BBs can be adjusted

according to the shooting environment or surroundings.

More Hop

Less

Hop