Operator's Manual

LOADING BBs

1. Pull the magazine follower down until it locks.

2. Insert BBs into the magazine lip.

3. Make sure to have a 3mm clearance between BBs and the top lip of the

magazine.

4. Push the magazine follower lock to release.

WARNING: Use only 6mm high grade BBs. Using low grade

BBs will damage Airsoft gun.

NOTE: Use 0.25g or heavier BBs for better performance.

WARNING: Do not release the magazine follower when the

magazine is empty. Doing so will damage the magazine and

magazine follower.

Check for 3mm

clearance after

loading BBs.

3mm

Push

down

to lock

Push to

release

Magazine Lip