Operator's Manual

FRONT AND REAR SIGHT ADJUSTMENT
FRONT SIGHT ADJUSTMENT
• The front sight can be moved up and down when zeroing rear sight
• Turn counter clockwise to lower the point of Impact
• Stop turning when a click sound is heard
REAR SIGHT ADJUSTMENT
• Flip the rear sight between general and precise aiming
• To adjust the horizontal point of impact, rotate the windage knob located on the
rear of the sight
• To adjust the vertical point of impact, rotate the sight elevation knob located on the
left and right side of the sight
WARNING! If turned too far, the front sight will come off.
!
Rear Sight
Windage Knob
Sight Adjustment Tool
Rear Sight
Assembly
Adjustment
Knob
Large
Hole
UP
DOWN
Small
Hole
Use this position
for full auto firing
Turn Clockwise
Turn
Counter- Clockwise
Use this position
for precision firing
The sight assembly is marked in
millimeter for precise adjustments
KM4A1, KM4CQB
13