Operator's Manual

BATTERY INSTALLATION
1. Set the re selector to safe mode. Place the safety cap on the barrel end. Slide the
retaining ring back and remove the lower part of the hand guard.
2. Place the battery into the lower half of the hand guard. Push the connector
plugs together rmly until they click into place.
3. Replace the lower battery cover and slide the retaining ring back into place.
FUSE
To replace the fuse, open the hand guard by following the same procedure as the battery
installation. Open the fuse assembly and replace the fuse with a 15A glass fuse.
Hand Guard
Safety Cap
Retaining ring
Connector Plug
Hand Guard
Fuse Assembly
1
2
1
2
KM4A1, KM4CQB
11