Operator's Manual

BATTERY INSTALLATION

1. Set re selector to safe mode. Slightly pull the stock cover release tabs to

remove the cover.

2a. Two types of battery can be used, nunchuck battery and small Lipo pack

battery. When using a nunchuck battery, place the battery into the stock. Push

the connector plugs together rmly until they click into place.

2b. When using a small Lipo pack battery, place the battery into the stock cover.

Push the connector plugs together rmly until they click into place. *Make sure

the small Lipo pack battery size is no larger than 4”H x 1.25”W x 0.62”D

3. Close the butt stock cover.

WARNING: Stock must be fully collapsed before opening the

stock cover. Do not remove the stock completely from the gun,

doing so will disconnect the terminal inside

Pull on Stock

Cover Release

Tabs

Stock

Cover

Remove

Stock

Cover

Connector

Plug

Connector

Plug

Small Lipo

Pack Battery

Nunchuck

Battery