Operator's Manual

M23
M35
M47
M19
M32
M33
M36
M37
M96
M38
M39
M40
M42
M43
M51
M52
M53
M54
M69
M70
M71
M72
M55
M56
M57
M58
M59
M62
M64
M65
M74
M78
M79
M80
M97
M101
M107
M125
M125
M125
M125
M125
M125
M48
M124
M123
M121
M63
M121
M121
M121
M122
M120
M120
M118
M115
M115
M115
M115
M116
M116
M119
M119
M114
M117
M117
M3
M7
M127
M127-1
M127-1
M127
M127-1
M127-1
OPERATING UNDER UNUSUAL CONDITIONS
Unusual conditions are dened as any condition requiring special maintenance.
Perform maintenance outlined for the climate similar to your operational area
Extreme Cold:
Operating an Airsoft gas gun in extremely cold temperatures is not recommended. Cold
temperature will cause the Hop-Up Bucking to harden, reducing its effectiveness or
cause the gearbox shell to fracture during operation, rendering the gun inoperable.
Extreme Heat:
Do not keep Airsoft gun and batteries under direct sunlight for long periods of time.
Dust or Sand:
Dust or sand can get into a gun and cause malfunctions and/or excessive wear. Keep
the gun covered whenever possible. Use lubricant sparingly, as lube naturally attracts
dirt and other particles. After use in a dusty area, always eld strip the gun (refer to
Disassembly Section) and clean any areas you can reach with a soft, lint-free cloth.
Heavy Rain:
Keep the gun out of the rain and water. This will prevent electrical failure and uid
build-up inside the mechbox. Dry completely with clean cloth and clean inner barrel if
necessary.
KM4 SERIES GEARBOX DIAGRAM
14